Connect Systems CS4000 Bedienungsanleitung PDF herunterladen (Seite 2)

Eclipse 4000 Maintenance Manual

01/12/02 V2.00 Page 2

Introduction

Included in this manual are sections on TRANSPORTING, INSTALLING,

MAINTAINING, and CLEANING the system.

This manual is also designed to give an engineer’s view of the Eclipse

Checkweigher and Sentry Metal Detector Combined system, and as such is of a

technical nature. The complete system is detailed, along with normal operation

and also fault finding and repair.

The combined System can be operated in two modes.

1. Where the metal detector handles its own rejects prior to the Checkweigher.

2. Where the Checkweigher handles metal rejects on its outfeed conveyor.

It can also be configured as an INTEGRASEARCH, which enables the metal

detector set-up parameters to be viewed on the Checkweigher display.

This system like all the other Cintex systems can be configured to confirm vital

actions and or utilities are present such as a reject pack has left the line, that the

reject bin is not full (obstructed), that the correct air supply is available, that the

relevant photocells are not obstructed, etc. Any or all of these can be connected

up to stop the line in the event of failure of any of them.

TRANSPORTATION:

1. Checkweigher Motor Cables – These are disconnected and temporarily tied up to prevent damage

during transportation. They must be released and connected prior to commissioning. Ensure that

the sealing rubber is secured with the cable and connector.

2. When lifting any machine and especially a combined system, always use a forklift and support

from under the lower frame bars. Note that the centre of gravity will be between the CS4000

cabinet and the metal detector head since the majority of the weight will be in the metal detector

head. Where fitted always use the fork lifting brackets.

3. Secure with ties through and over the lower frame, DO NOT TIE DOWN OVER THE TOP OF

THE COVER GUARDS OR THE CONVEYORS.

4. DO NOT LIFT OR PULL THE SYSTEM BY THE CONVEYORS.

1 2 3 4 5 6 7 ... 12 13

Keine Kommentare

Connect Systems CS4000 Bedienungsanleitung Seite 2